7

So my pc went to sleep earlier and may have slipped into a coma, now I'm not getting any power to the system. I swapped a new psu in last weekend, so j figured that may have been the culprit. I unplugged the 24 pin and cpu cable and plugged my old psu into with no change. Checked the fuse and the outlet I'm using and they're both fine.

Any suggestions?

So my pc went to sleep earlier and may have slipped into a coma, now I'm not getting any power to the system. I swapped a new psu in last weekend, so j figured that may have been the culprit. I unplugged the 24 pin and cpu cable and plugged my old psu into with no change. Checked the fuse and the outlet I'm using and they're both fine. Any suggestions?

14 comments

https://www.newegg.com/gigabyte-x570-aorus-master/p/N82E16813145155?item=N82E16813145155

I'm seeing a few other reviews that describe my issue. It just fuckin dies randomly one day.

[–] PMYA 1 points (+1|-0)

Take the battery out of the motherboard for a bit and put it back in and try.

[–] PhunkyPlatypus [OP] 1 points (+1|-0) Edited

Motherfucker! It worked!

Double motherfucker. I think my new PSU is dead. Got it all hooked back up and now there's no juice again.

Triple motherfucker! I forgot I unplugged my og psu to plug in the secondary psu to test things. Og psu is not dead

That will require removing the gpu, which I hate handling these days, due to the penaltie$$$ of fucking up.

I did however hit the clear cmos button on the back of the mobo. No change from it. Removing the battery for a minute will be the next stepm

[–] xyzzy 1 points (+1|-0)

Are there any LEDs or 7-segments on the board which suggest basic power?

You could try a CMOS reset, some BIOSes don't do well with certain sleep states used by some OS versions.

The LED for the power button on the mobo isn't lighting up, which should be on when it is off but powered.

It's running windows 10, which does occasionally give me an issue when waking up (mainly my monitor not displaying) but nothing like this before

[–] xyzzy 2 points (+2|-0)

With a voltmeter you should be able to see some power on the board in all sleep stages, question is where. A stupid thing which sometimes breaks is the power button, so try shorting those two pins.

I don't have a voltmeter unfortunately. I've tried the case power button initially and the built in power button on the mobo. Neither have worked. And the built in one should be lit even if it's powered off. As long as it's receiving power.